We supply a range of accessories and cables for the following telescope systems
Meade ETX, LX, DS & LXD telescopes
Synta EQ6, HEQ5, EQ5, EQ4 & EQ3-2 Mounts
Vixen Sphinx & Sky Sensor 2000 Mounts
Losmandy Gemini
|
12V Power Cable for Losmandy Gemini |
|
|
Awaiting Picture |
This cable provides power to a Losmandy Gemini System from a cigarette lighter socket. Theses are available in the following lengths 2m, 3m, 5m, 8m & 10m (other lengths are available to special order. Please email to enquire about pricing)
|
|
Cable Length |
Code |
Cost |
| Gemini Power Cable 2m | LGP2 | £14.99 |
| Gemini Power Cable 3m | LGP3 | £15.99 |
| Gemini Power Cable 5m | LGP5 | £19.99 |
| Gemini Power Cable 8m | LGP8 | £22.99 |
| Gemini Power Cable 10m | LGP10 | £24.99 |
|
Losmandy Gemini 12V to 18V Power Converter |
|
|
Awaiting Picture |
This adaptor will convert the 12V output from a cigarette lighter socket to 18V in order to provide improved slewing on a Gemini equipped G11. It is
designed to deliver up to 6A at 18V which is twice the required current so it
has ample reserve for peak requirements. The converter has a 0.3m input lead and a 1.8m lead to the Gemini.
|
|
Cable Length |
Code |
Cost |
| Gemini 12V to 18 V converter | LGCONV | £39.99 |
|
PC Connection cable to fit Losmandy Gemini |
|
 |
Plugs into RS232 port on Gemini controller, requires 9 pin serial port on PC. Theses are available in the following lengths 3m, 5m, 10m,15m & 20m (other lengths are available to special order. Please email to enquire about pricing).
|
|
Cable Length |
Code |
Cost |
| Gemini serial Cable 3m | LGSRE3 | £12.99 |
| Gemini serial Cable 5m | LGSRE5 | £14.99 |
| Gemini serial Cable 10m | LGSRE10 | £19.99 |
| Gemini serial Cable 15m | LGSRE15 | £22.99 |
| Gemini serial Cable 20m | LGSRE20 | £24.99 |
|
Deluxe PC Connection cable to fit Losmandy Gemini |
|
 |
Plugs into RS232 port on Gemini controller, requires 9 pin serial port on PC. This cable differs from most cables currently on the market as it is made using certified data transmission cable and has a heavy duty die cast metal housing at the computer end. If you demand a heavy duty cable that will stand up to the abuse in the field them this is the one for you. Theses are available in the following lengths 3m, 5m, 10m,15m & 20m (other lengths are available to special order. Please email to enquire about pricing) Each cable is individually tested for performance once made up.
|
|
Cable Length |
Code |
Cost |
| Gemini serial Cable 3m | LGSRD3 | £15.99 |
| Gemini serial Cable 5m | LGSRD5 | £18.49 |
| Gemini serial Cable 10m | LGSRD10 | £24.99 |
| Gemini serial Cable 15m | LGSRD15 | £27.49 |
| Gemini serial Cable 20m | LGSRD20 | £29.99 |
|
Losmandy Dovetail Safety Clamps |
|
|
Awaiting Picture
|
These clamps are designed to fit onto the Losmandy style dovetail on underside of the plate, in order to prevent the plate slipping in the event of the locking knob on the saddle being inadvertently loosened. They can also be used as stops to allow the plate to be replaced in the same position after removal from the saddle. Supplied either singly or in pairs. This is an ideal accessory for users of C14's on CGE dovetails.
|
|
Counterweight Size |
Code |
Cost |
| Losmandy style safety clamp single | LGSCS | £25.00 |
| Losmandy style safety clamp pair | LGSCP | £47.00 |
|
Stainless Steel Counterweights for Losmandy and CGE Mounts |
|
|
|
These counterweights are specifically made to fit the 1.25" counterweight shaft and are made from Stainless steel with a stainless locking bolt and a brass pin to prevent marking the shaft. The standard sizes are 5.2Kg reduced diameter 4" (as shown in the picture), 5.2Kg standard diameter 6", 12.5Kg standard diameter and 16Kg standard diameter. Other sizes are available to order so if you have a specific requirement please email us with your requirements As counterweights are only made to order please allow a minimum of 28 days for manufacture and delivery.
|
|
Counterweight Size |
Code |
Cost |
| Stainless 5.2Kg Reduced | LGSSCW52N | £76.00 |
| Stainless 5.2Kg Standard | LGSSCW52S | POA |
| Stainless 12.5Kg Standard | LGSSCW12S | £136.00 |
| Stainless 16Kg Standard | LGSSCW16S | POA |
|
Replacement ABEC7 worm bearings (Stainless steel) for G11 and G8 |
|
|
Awaiting Picture |
These are not the original bearings but are to the higher ABEC7 spec rather than the original ABEC5, they also have stainless housings and balls instead of the normal carbon steel so do not suffer from corrosion problems. They are direct replacements on G11 and G8. If you require further advice please email for more information. |
|
Description |
Code |
Cost |
| ABEC7 Worm bearing SS single | LGWBS | £15.70 |
| ABEC7 Worm bearing SS pair | LGWBP | £31.00 |
|
27C4001 Blank Reprogrammable EPROM's for Gemini Software Updates |
|
|
Awaiting Picture |
These are erased and checked EPROM's ready for programming with updates. If you require these programming or further advise please email for more information. |
|
Description |
Code |
Cost |
| Blank 27C4001 EPROM | LGEPROM | £3.50 |
